Ubiquiti U6-LR UniFi Long Range WiFi 6 PoE+ Access Point

Does not include PoE injector. This product has specific requirements if installed outdoors, please see the bottom of the page.

The Ubiquiti U6-LR UniFi Long Range WiFi 6 PoE+ Access Point is a high-performance access point leveraging advanced WiFi 6 technology to provide powerful wireless coverage to enterprise environments.

It delivers an aggregate radio rate of up to 3.0 Gbps with 5 GHz WiFi 6 (4×4 MU-MIMO and OFDMA) and 2.4 GHz 4×4 MIMO radios.

The U6-LR seamlessly blends into any environment, and is capable of being mounted in indoor and semi-outdoor environment (IP54 rated), and comes equipped with a Bluetooth Low Energy Radio for location based services.

Categories: , Tag: Product ID: 4933

Description

  • 1.3 GHz dual-core processor (now upgraded to support full-duplex 1 Gbps TCP/IP performance)
  • Four-stream high-efficiency Wi-Fi 6 technology
  • 5 GHz band 4×4 MU-MIMO and OFDMA with radio rate of 2.4 Gbps
  • 2.4 GHz band 4×4 MIMO with radio rate of 600 Mbps
  • Powered with 802.3at PoE+
  • Manage Your Networks from a Single Control Plane
  • Intuitive and Robust Configuration, Control and Monitoring
  • Remote Firmware Upgrade
  • Users and Guests
  • Guest Portal/Hotspot Support

Important Outdoor installation requirements

The Ubiquiti U6-LR may be installed outdoors under an eave or other protected location. Do not install the U6-LR in an open environment.

The mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling and the cable feed must be pointed downwards when wall-mounted.

Shielded Category 5 (or above) cabling should be used for all outdoor wired Ethernet connections and should be grounded through the AC ground of the PoE.

Excel Communications recommends that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti Networks